CDM YGSM 3 Triple HV Winding Machine Transformer winding machine is a machine used to form or rewind the windings of electrical transformers.
The windings in transformers determine the electrical properties of the transformer by winding the wires in coils in a certain order.
CDM-YGSM 3 Triple HV Winding Machine is used to wind the high voltage part of distribution and power transformer coils. Our machine, which can wind three coils at the same time, reduces the production time to one third.
CDM-YGSM 3 Triple HV Winding Machine consists of
components.
Brand List
CDM-YGSM 3 Triple HV Winding Machine consists of line driving device, high precision ball shaft system, linear guide rail, winding mechanism, decelerator, gearbox and other assembly combinations. The machine, which can wind three coils simultaneously in the HV winding of transformers, operates with high speed and accuracy.
Spindle Height | 850 mm | Round Wire Diameter | 0.6 - 4.0 mm |
Winding Axis Length | 800 mm (Max) | Stranded Cable Feature | 0.15-0.80 mm |
Coil Winding Diameters (Inner/Outer) | 80 mm - 800 mm | Insulation Layer | Air Shaft 3 Sets |
Torque | 800 N | Wire Tension | Pneumatic 3 Sets |
Speed Adjustment | 0-250 Rev/Min | Insulation Paper Width | 100-650 mm |
(Mechanical Variable Speed/Variable | Dual-Axis Release | ||
Frequency and Stepless Speed Adjustment) | Flat Wire | Magnetic Brake | |
Winding Power | 11 KW | Round Wire | Console Mode |
Winding Spindle | 60x60x2400 mm | Coil Removal (Traversing Pin) | 90 Degrees |
Servo Motor Winding Stroke | 550 mm | Encoder Count (5 Stages) | 0-9999.9 |
Cable Path | Screw Guide Servo | Operation Mode | Touch Screen |