CDM-RPL 2500 Automatic Radiator Production Line is the machine that produces radiators used for cooling power transformers.
Energy losses that occur when transformers convert electrical energy from one voltage level to another voltage level can cause the transformer to heat up and, in case of overheating, damage it.
Radiators are a system used to dissipate the heat generated inside the transformer and provide cooling of the transformer. The radiator is mounted on the outer surface of the transformer. These plates increase the surface area of the transformer, facilitating heat transfer with the atmosphere. You can click here for detailed information about transformer cooling types.
Our Fully Automatic Radiator Production Line, which produces radiators, can process 1st and 1.2mm thick ST12, ST14, SPCC, DCO1, 08F sheets. It produces 310mm, 480mm or 520mm wide honeycombs. Our production line adopts the technology of GEORG and MTM.
CDM-RPL-2500 Automatic Radiator Production Line consists of
components.
The line consists of automatic decoiler, roll forming machine, two-piece jointing device, multi-head spot welding machine, double-side seam welding machine, terminal welding machine, double-side edge trimming machine, terminal cutting machine, related transmission table and control system. This line can mainly produce three different wide wing plates 520 (535) mm, 480 mm, 320 (310) mm. The size change on the roll forming machine is achieved by hydraulic (other machines and transmission tables are manually adjusted). However, when the machine is fully automatic, the minimum center distance should be more than 1200 mm.
Delivery
Warranty
Technical Service
Commissioning
Speed
14 years of experienceimport time assurance1 year company warrantyFree installationFree trainingTechnical service (first year free)| PARAMETERS | VALUES |
| Processable sheet quality | ST12, ST14, SPCC, DCO1, 08F |
| Processable sheet thickness | 1.0mm – 1.2mm |
| Fin width | 310mm – 480mm – 520mm |
| Center distance | 1,000mm ~ 3,500mm |
| Center error rate | ±2.0mm |
| Folding pressure | |
| Positive | ≥ 0.2Mpa |
| Negative | ≥ 133Kpa |
| Oil circulation clearance | |
| With 1.0mm sheet thickness | ≥ 11mm |
| With 1.2mm sheet thickness | ≥ 11.5mm |
| Number of oil channels | |
| With 520mm fin width | 6 |
| With 480mm fin width | 5 |
| With 310mm fin width | 3 |
| Horizontal length of oil channel | 75cm |
